Home    /    Products    /    Viscotube Oil Test Kit

Viscotube Oil Test Kit

The CMT Viscotube is a falling ball viscosimeter allowing to measure the viscosity of oil in centistokes on site.

$1,058.07

SKU: OTK-CT-11005 Category:

Description

The CMT Viscostick provides information whether the viscosity has increased or decreased. Typically it will detect 5-10% fuel dilution as well as increases in viscosity due to oil contamination like water. It can not be used to get an actual viscosity value but you will get an idea whether the viscosity is greater or smaller than the viscosity of the reference oil. It is essential that both oils have the same temperature at the time of the measurement.

The CMT Viscotube is a falling ball viscosimeter allowing to measure the viscosity of oil in centistokes on site. The Viscotube closes the gap between the low cost viscosity stick and the highly accurate Heated Viscosity Meter.

The Viscotube is equipped with a clear screw cap at each end allowing to see the falling ball arrive at the other end. A tripod support stand on a mirror base plate helps to monitor the falling ball. The device is supplied with three sizes of balls to cover a wide range of viscosity. A digital thermometer is used to measure the temperature after completing the test.

Ordering Information
OTK-CT-11005
Viscotube Oil Test Kit
Range: 20-600 cSt @ 40°C, using
three sizes of balls
No. of Tests: Unlimited
Test Time: 1 – 10 minutes
Reagents: N/A
OTK-CT-11004
Viscosity Oil Test Kit
Range: go / no go
Application: Lubricating oils, viscous
hydraulics
No. of Tests: Unlimited
Test Time: 1 minute
Reagents: N/A
OTR-CT-11000
Test Kit Cleaner (250 ml)

Additional information

Weight 2.2 lbs
Dimensions 35 × 14 × 28 in
Brand

The information contained herein is subject to change without notification.
Typical properties may vary slightly.

My Cart