Description

By continuously monitoring wear debris generation, the device alerts users to faults in their earliest stages, allowing for lower cost correction actions than conventional schedule based maintenance.
The Metallic Particle Sensor will detect, categorize (ferrous vs. non-ferrous), and size metals within a machinery lubrication system. The monitor will detect and measure particles with an estimated spherical diameter of 50 micron ferrous and 150 micron non-ferrous and larger. The compact, robust device can be mounted within just about any lubrication system on any
machine.
The sensor communicates in real‐time using the MODBUS® serial digital communication standard over RS485 or RS232. This industry standard allows for easy integration into your current
systems. But a wide range of output formats are available including particle type/size, approximate mass, and particle counts in user configurable bins.
When connected to a host system the device will give indication of the machinery condition relative to wear metals generated. This gives you the control to improve your asset health management by being able to make informed maintenance decisions based on real‐time data.

Specifications
Detection Sensitivity
(Debris)
40 μm Ferrous & 150 μm Non-Ferrous Metallic Particles
Communications RS48/RS232 Modbus RTU, Pulse Output
Oil Connection 3/4” -16 SAE Female, -8 JIC Male, -8 BSPP Male, or 1/2” Compression
Ambient Temperature -40 to 85°C
Fluid Temperature -40 to 85°C
Volumetric Flow Rate 0.95 – 38 LPM (0.25 – 10 GPM)
Sensor Bore Diameter (12 mm)
Ingress Protection IP65
Power Supply 10-30 VDC, 300 mA
Weight 0.68 kg